Make Fabric Wine Bottle Gift Bags in 1 Hour for $12
Reinforced drawstring channels and a squared-off bottom seam are what keep a bag from ripping under a heavy bottle.
![[#~image_alt_1~#]](/_next/image?url=https%3A%2F%2Fd3klpa3rfwubzz.cloudfront.net%2Fmedia%2FAPI%20Uploads%2FDIY%2F97734cd2d9ca2cd005bf216cbb7deee2_0bf0fc3b53.jpg&w=1920&q=75)
The last gift of the season is often a bottle for a New Year's party, and it usually gets wrapped in paper that gets torn and tossed in seconds. A sewn fabric bag is a better answer, but the difference between one that lasts for years and one that rips on the first carry comes down to the bottom seam and the drawstring channel. A standard bottle weighs about three pounds, and all of that pulls on the seam allowance and the cord. Backstitching at the seam ends and sewing a squared-off base spreads the load across the fabric instead of a single stitch line. The whole project costs $12 total and takes about 1 hour, using a plain sewing machine or a few simple hand stitches. Make a few tonight and you're set for every party this winter.
What You'll Need
- Materials (~$12 total):
- 1/2 yard of medium-weight cotton or cotton-linen fabric, about $6 (makes two bags)
- 2 yards of 1/4-inch cotton twill ribbon or cord, about $3
- All-purpose polyester thread in a matching color, about $3 (or use what you have)
- Tools:
- Sewing machine (or needle for hand stitching)
- Fabric scissors
- Straight pins or sewing clips
- Measuring tape or ruler
- Iron and ironing board
- Safety pin (for threading the cord)
How to Do It
- Cut two rectangles of fabric, each 9 inches wide by 16 inches tall. A standard 750 ml bottle is about 3 inches across and 12 inches tall, so this size leaves room for the channel and a snug fit without bulk.
- Press the top edge of each rectangle down 1/2 inch, then another 1 1/2 inches, to form the drawstring channel. Pressing now gives you crisp folds that make the stitching straight and keeps the raw edge hidden so it won't fray.
- Stitch the channel on each piece close to the lower fold edge, backstitching at both ends. This secures the casing so the cord can slide through it freely without catching on a loose thread.
- Pin the two pieces right sides together, lining up the channel folds. Matching them exactly means the cord opening lines up on both sides of the finished bag.
- Sew up both sides and across the bottom with a 1/2-inch seam allowance. Stop at the channel on each side so the cord openings stay open, and backstitch at each start and stop. Those backstitches are the ones that take the bottle's weight, so do them twice.
- Square the bottom by pinching each bottom corner flat so the side seam sits on top of the bottom seam. Sew straight across 1 inch from the point. This gives the bag a flat base so it stands on its own and spreads the bottle's weight across a wider seam.
- Turn the bag right side out, poke out the corners, and press it flat. Pressing sets the seams so the bag looks crisp and polished instead of puckered.
- Thread the cord through the channel with a safety pin, around the bag and back out the same side. Knot the two ends together inside a single knot, then pull the cord to cinch the bag closed. Knotting one loop keeps the cord from pulling out of the channel.
Professional boutique gift wrappers add a lining or a contrasting cuff to make a bag feel custom. Fold the top 3 inches of the finished bag outward over the cinched cord so the lining fabric or pretty wrong side shows, then tuck a sprig of rosemary or a tag under the cord. It looks styled and takes ten seconds.















