Build a Wooden Spice Grinder Tray in 2 Hours for $24
A raised lip and a felt-lined base are what keep spilled salt and oil off your counter instead of letting them creep across it.
![[#~image_alt_1~#]](/_next/image?url=https%3A%2F%2Fd3klpa3rfwubzz.cloudfront.net%2Fmedia%2FAPI%20Uploads%2FDIY%2Fc19306c7356b1e9d8c4400b53454ae4b_f97a46b99c.jpg&w=1920&q=75)
Every cook knows the crumb trail of pepper and salt that follows a grinder around the counter. Store-bought trays run $35 or more and are usually shallow, so spills slide right over the edge. The difference between a tray that works and one that frustrates you comes down to the lip height and the seal on the joints. A lip of at least 3/4 inch contains spills, and a coat of food-safe finish keeps oil from soaking in and swelling the wood. Without both, the tray warps and stains within weeks. This beginner-friendly build takes about 2 hours and costs $24, plus a little drying time for the finish.
What You'll Need
- Materials (~$24 total):
- One 1x6 poplar or oak board, 6 feet long (~$12)
- 1-1/4-inch finish nails or brad nails (~$3)
- Waterproof wood glue (~$4)
- Food-safe mineral oil or board finish (~$5)
- Self-adhesive felt furniture pads, 4 pack (free from the junk drawer or ~$2 extra)
- Tools:
- Handsaw or miter box
- Tape measure and pencil
- Hammer
- 120-grit and 220-grit sandpaper
- Clean cloth
How to Do It
- Measure and mark your cuts: one 12-inch base, two 12-inch long sides, and two 4-1/2-inch end pieces. Marking everything first keeps your pieces matched so the corners meet cleanly.
- Cut each piece with a handsaw and miter box. Cut slowly on the waste side of the line; a square cut means tight joints that don't leak oil.
- Sand every piece with 120-grit, then 220-grit. Smoothing now is much easier than after assembly, and it prevents splinters in your fingers later.
- Glue the long sides along the base edges, applying a thin bead of waterproof glue. Press firmly and wipe squeeze-out right away so it doesn't block the finish.
- Nail through the sides into the base with 1-1/4-inch finish nails, spaced about 3 inches apart. The nails hold things tight while the glue cures, so the frame won't shift.
- Attach the two end pieces the same way, gluing and nailing them between the long sides. This closes the lip on all four edges so nothing escapes.
- Finish with 2-3 coats of food-safe mineral oil, letting each soak in for 20 minutes. The oil blocks moisture and keeps the wood from staining or cracking.
- Stick felt pads on the underside corners once the oil is dry. They protect your counter and stop the tray from sliding when you grind.
Professional kitchen designers often tuck a small tray beside the stove so the 'cook's tools' sit within one arm's reach. Try placing yours on the side where you are right-handed and keeping only the three things you reach for most. Tight, limited grouping looks intentional and keeps the counter clear.















